RAD LA-110 ATM INTERTATED ACCESS

		RAD LA-110 ATM ACCESS
			Multiplexes voice and data over ATM over xDSL Dedicated, simple IAD Supports ATMF LES standard Supports four POTS, four ISDN S0 or one sub-E1 port Signaling based on Emulated Loop Control Protocol (ELCP) standard Supports one 10/100BaseT port ATM adaptation layers: AAL1, AAL2 and AAL5	Supports SHDSL (2-wire or 4-wire) or ADSL uplink Supports Frame Relay-ATM network and service interworking (FRF.5, FRF.8) Supports data interfaces V.35, V.36, X.21, RS-530 Plug-and-play operation Manageable via local ASCII terminal, remote Telnet or SNMP-based RADview-EMS
Contact Us for information or pricing
E Mail: Company: Question or Comments

	VoDSL and leased line application

The LA-110 is an ATM IAD that enables service providers to offer voice, LAN and data to small and medium-sized businesses over a single access line. The unit is dedicated per service and easy to install. It allows migration from E1 to xDSL transmission mode without replacing the unit. On the user side, the LA-110 supports four analog or four ISDN S0 voice channels, or one sub-E1 port. In addition, it supports one 10/100BaseT LAN port and an optional data port. The LA-110 supports Emulated Loop Control Protocol (ELCP) signaling for both POTS (Plain Old Telephone System) and ISDN voice over ATM. This provides for seamless interoperability between the LA-110 and equipment from leading voice gateway vendors. To support high data rates over the Local Loop, the LA-110 uplink supports ADSL or SHDSL. The xDSL is interoperable with a variety of DSLAMs and voice gateways. The LA-110 offers ATM multiservice and management capabilities, guaranteeing QoS and traffic shaping per VC. LA-110 supports AAL1 for Circuit Emulation Service (CES) and Dynamic Bandwidth CES (DB-CES) over a fractional E1 interface. The LA-110 also supports AAL2 for voice traffic and AAL5 for data traffic. The LA-110 can deliver different services over ATM, including Ethernet and IP in accordance with RFC 2684, and Frame Relay interworking in accordance with FRF.5 and FRF.8. Various management interfaces are available: - in-band and out-of-band (SNMP) management - local management via ASCII terminal Selectable clock source enables the use of an adaptive clock as well as a clock originating from the network port. The LA-110 is a compact, 1U high unit. It is suitable for mounting in a 19" rack.