Home

SendFar Wireless Client Bridge

--Access Point to Wired Ethernet Connectivity

--Ad-hoc, peer-to-peer, and infrastructure

--Communications to wired Ethernet

--Roaming IEEE 802.11b compliant

--Static IP support (Address, Subnet,   Gateway)
--DHCP client request for dynamic IP   support
--Password authentication
--SSID, Channel, and IP Address
--MAC address (WLAN Card)
--Transmission rate and quality
--Scan results for AP’s and Ad-hoc   networks
--Lists Bridged IP & MAC Addresses
--Ad-hoc or Infrastructure mode
--SSID including “any” (unspecified SSID)

--4 separate WEP keys (64- or 128-bit)
--Deny unencrypted data
--Shared key authentication
--Radio Data Rate: 11, 5.5, 2 and 1 Mbps,   Auto Fall-Back
--Transmit Range (open environment)
  11.0 Mbps – 300m
  05.5 Mbps – 400m
  02.0 Mbps – 500m
  01.0 Mbps – 800m
--EMC Certifications: FCC Part 15, ETSI   300/328
--Fully interoperable with IEEE 802.11b   compliant products

Product Specification

2.4 ~ 2.484 GHz
Direct Sequence Spread Spectrum
(DSSS)
Modulation Modulation CCK (11, 5.5Mbps)
DQPSK (2Mbps)
DBPSK (1Mbps)
Sensitivity @FER=0.08 @FER=0.08
  11.0 Mbps < -85dBm
  05.5 Mbps < -88dBm
  02.0 Mbps < -91dBm
  01.0 Mbps < -93dBm

Temperature Range
  -20 to 55 (operating)
  -20 to 75 (storage)
Humidity (non-condensing)
  10% to 90% typical
Power 100mW
Power Supply
Input 100 ~ 240 VAC
Output 5VDC / 2A